Advanced
From PowerFolder Wiki
Contents |
Port
If you don't want PowerFolder to use its default port, enter your custom port here.
Automatically find a port
PowerFolder will choose a port by itself if this box is checked. If you run PowerFolder as a system service this box needs to be enabled if you want to start the GUI.
Open Windows Firewall
PowerFolder will configure the Windows Firewall so it can work. If you don't check this box you might have to setup the firewall manually
Interface address
LAN IP list
This feature is interesting if you want to use PowerFolder in LAN only mode. PowerFolder will connect to this addresses in LAN but also via Internet if the addresses are outside the LAN.
Use ZIP compression on LAN
Use Delta Sync on LAN
Enable internal image preview
Use Delta Sync
Delta Sync only exchanges those parts of a file which have been changed. This makes much less data transfer necessary, but costs a little more CPU power.
Delete empty directories
Enable debug logging
Checking this box will activate the debug logging. If you encounter some major problem, the PowerFolder Team will ask you to check this box and restart PowerFolder. The log files will be stored in the PowerFolder installation path, and should be sent only to Support(at)powerfolder.com or contact(at)powerfolder.com. With the log files we can analyse nay problem you might be having. Most important log file: PowerFolder.log. Other log files are not necessary in most cases.
